EN
ET42 Industrial grade RFID barcode printer
Precise antenna positioning
Supports UHF tags
Automatic detection of position
Efficient, intelligent and convenient
15mm inlay distance
- Overview
- Specifications
- Recommended Products
Overview
RFID automatic calibration
The RFID automatic calibration function enables the printer to automatically set the best read and write Settings for tags of different chips, lines and sizes through simple key operations, without the need for manual debugging. Press the "Power On" button twice and the RFID power will be automatically calibrated.
Automatic reprinting function
The automatic marking function for invalid labels enables the printer to automatically detect and print the words "invalid" on the label surface when a defective or damaged label is found during the reading and writing process, and to automatically reprint the label. This helps customers screen out defective labels and makes the application more stable.
It has a wide range of applications
According to customer requirements, we can provide label design and editing software LE or SDK secondary development packages, and customize the read, write and verification processes of labels, which can meet the application needs of different industries.
The label has strong adaptability
It can simultaneously support the printing, reading and writing verification of both ordinary RFID tags and flexible anti-metal tags (1.25mm), and has a wide range of tag thickness adaptability. The structural design of the three position penetration sensors can meet the positioning requirements of tags with different positioning methods.
Humanized parameter setting
It provides an intelligent assistant setting function, allowing manual adjustment of the RFID power and antenna position of the printer, and offers the most suitable application Settings for RFID.
Easy to operate
The open structure design features a nearly 90° movement opening, making it convenient for users to replace the paper roll and carbon ribbon. The operation and maintenance are simple.
Design of large-capacity paper silo
It supports 300-meter large-capacity carbon ribbons and 127mm diameter paper rolls, significantly reducing the frequency of users replacing consumables and improving work efficiency
Easy to tear paper
The upper and lower paper tearing structure design can be adapted to extremely narrow label paper tearing, fully respecting users' usage habits and making paper tearing more convenient.
Durable
The diamond-like material print head is extremely wear-resistant and corrosion-resistant, with a print life of up to 150 kilometers.
Specifications
| Model | ET42 |
| Printing method | Direct thermal/thermal transfer printing |
| Print resolution/Maximum print speed | 203 dpi/ 8 ips can be selected as 300 dpi/6ips or 600dpi(24 dots per millimeter)/4ips |
| Maximum print length | 3826 mm (203 dpi)2624 mm (300dpi)/2052 mm (600 dpi) |
| Maximum print width | 104mm |
| Printing Protocol | ZPL, DPL, EPL, TSPL |
| Type of printing medium | Continuous paper, sewn label paper, black label paper, operating frequency 860-928MHz, supports EPC UG2,ISO 18000- ultra-high frequency electronic tags, self-adhesive labels and flexible anti-metal labels 6C standard protocols |
| RFID module | Integrated high-performance UHF RFID reader/encoder supports simultaneous printing of self-adhesive labels and supports UHF EPC Gen 2/ISO Supports printing while reading and writing data, supports reading the TID, EPC, flexible anti-metal tag 18000-6C compatible tags, and the working mode of RFID protocol that only prints or only reads and writes data TID+EPC data |
| Paper detection method | Reflective and penetrating dual sensors |
| Diameter of printing medium | 1.5 inches /3 inches inner diameter; Maximum outer diameter of 10 inches |
| Thickness of printing medium | 80 microns to 250 microns; The thickness of the flexible anti-metal label is 0.06 to 1.5mm |
| Printing medium width | 25 millimeters to 120 millimeters |
| Carbon ribbon type | Wax-based, resin-based, wax-based/resin-based mixture |
| Carbon ribbon tube core | 1 inch |
| Carbon ribbon width | 30 millimeters to 110 millimeters |
| Length of carbon ribbon | 450m |
| MCU parameters | 32-bit processor ARM9 architecture |
| Built-in font | Alphanumeric, Simplified Chinese, Traditional Chinese, and user-defined fonts for 29 international character sets are supported |
| Barcode QR code | UPC-A, UPC-E, EAN128,Codabar, CODE128, CODE39, CODE93, EAN-8, EAN-13, UCC/EAN128, POSTNET, ITF14, HIBC, MSI, Plessey, Telepen, FIM, GS1 DataBar, German Post Code, Planet 11 & 13, Japanese Postnet, Interleaved 2 of 5, Standard 2 of 5, Industrial 2 of 5, Logmars, CODE11, UPC A/E 2 and 5 add-onCODE49, CODABLOCK, PDF417, Data Matrix, Maxicode, QR Code, MicroPDF471, Aztec |
| Sensor configuration | Printer core disengagement detection, ribbon depletion detection, medium depletion detection, hot write head over-temperature detection, seam mark/hole mark/black mark position detection, motor over-temperature detection, radio frequency tag detection |
| Standard equipped with communication interface | One B-type USB, three USB Hosts, one Ethernet port, one RS232 serial port, and one RJ45 port |
| Optional communication interface | Parallel port or labeling machine interface, Wi-Fi |
| Memory | 512MB |
| Flash memory | 256 MB |
| Operation interface | Supports domestic operating systems,4 status lights, 8 buttons, and 1 3.5-inch color display screen |
| Appearance dimensions (length x width x height) | 460.4x263.6x330.5mm |
| Weight | 12.5KG |
| Safety Specifications | CE, FCC, CCC, CB, UL, RoHS, WEEE |
