EN
USB Plus+ RFID Reader World-class UHF RFID Desktop Reader
The ThingMagic USB Plus+ RFID Reader is ideal for applications that require reading and writingof EPC Global Gen2 tags on a desk or workstation and in areas where space is limited. The USBPlus+ is controlled and powered by a host PC or laptop through a USB interface and is compat-ible with ThingMagic's application development tools, permitting rapid creation of RFID solutionsWith a software adjustable read distance up to 3 ft (0.91 m), the USB Plus+ supports a variety ofapplications, including RFID tag commissioning, manufacturing WIP, document tracking, librarybook check in/out, retail point of sale, event and hospitality services, hospital patient workflows,and more. The high-performance internal antenna of the USB Plus+ is also ideal for commission-ing high memory tags and reading small form factor RFID tags more effectively.
- Overview
- Specifications
- MAKING RFID EASY TO USE
- Recommended Products
Overview
Thingmagic USB Plus+ Desktop RFID Reader is a low-cost RFID reader platform for developing and deploying interactive read-write applications. Based on the first-class M5e-C UHF RFID module design, the USB Plus+ RFID Reader enables the rapid establishment of RFID solutions from the host PC or laptop via the USB interface and application development tools compatible with Thingmagic.
The software can be read at a distance of 3 feet (0.91 meters). USB Plus + supports a wide variety of applications, including:
• RFID tag programming station
• Workstations for manufacturing workflows
• People and assets handling check-in and check-out
• Document tracking
• Check-in/check-out in the library
• Solutions for the incident and the hotel
• Retail point of sale
Thingmagic USB Plus+ can efficiently adjust high-end memory tags and RFID tags to make them read more effectively. A desktop RFID reader that is particularly suitable for learners and developers to use.
Specifications
| Ordering Information | |
| Reader | USB-5EC |
| Development Kit | USB-5EC-DEVKIT |
| Tag/Transponder Protocols | |
| RFID ProtocolSupport | EPCglobal Gen 2 (ISO 18000-6C) with Anti-Collision and DRM |
| RF Interface | |
| Antenna | Internal linear polarized antenna with peakGain 1 dBi from 860-960 MHz |
| RF PowerOutput | Separate read and write levels (into theantenna)are command-adjustable from10 dBm to 23 dBm(200mW), +/-1.0 dBmaccuracy |
| Frequency |
Pre-configured for the following regions: FCC 902-928 MHz (Americas) ETSI 865.6-867.6 MHz, 869.85 MHz (EU)KCC 917-920.8 MHz (Korea) TRAI 865-867 MHz (India) ACMA 920-926 MHz (Australia) SRRC-MII 920-925 MHz (P. R. China) 'Open' (Customizable) 860-960 MHz |
| Data/Control Interface | |
| Physical | USB mini-B connector, with 2 foot (61 cm)cable terminated in A-type plug |
| Signaling | Asynchronous serial interface with 3.3/5Vlogic levels; baud rates from 9600 to921,600 bps |
| 1/0 | Two I/O command controlled LEDsand two 1/O command queried switches |
| Protocol | Command-response protocol protectedby length field and 16-bit CRC |
| Physical | |
| Dimensions(not includingstand) | 97 mm L x 61 mm W x 25 mm H(3.8 in L x 2.4 in W x 1.0 in H) |
| Regulatory & Safety | |
| Regulatory |
FCC 47 CFR Ch.1 Part 15 Industrie Canada RSS-21 0 ETSI EN 302 208 v1.4.1 |
| Safety |
IEC 60950-1(ed.2) US-17650-UL |
| Power | |
| DC Power Required |
DC Voltage: 5 VDC (Powered by USBinterface) DC Power: 2.7 W (540 mA) max Supplied interface cable terminates intwo type-A plugs: one for power andsignal, the second for additional powerif needed |
| Idle Power Consumption | 1.7 W max at idle (Power management modes can beused to reduce this to as little as 0.1 W) |
| Environment | |
| Operating Temp. | -20C to +60C |
| Storage Temp. | -40C to +85C |
| Architecture | |
| User-accessible Flash Memory | 16 kB |
| Tag Buffer | 200 tags |
| Performance | |
| Tag Read Rate | Up to 200 tags/second |
| Max ReadDistance | Up to 3 ft (0.91 m) depending on tagsensitivity and orientation |
Specifications subject to change without notice.
MAKING RFID EASY TO USE
ThingMagic is dedicated to driving the barriers to deploying RFID technology as low as possible. We design our products to be easyto use out of the box and to deliver predictable, reliable, and repeatable performance. Our development tools require litle RFIDexpertise, enabling you to rapidly design, test, and deploy your RFID solutions.
Developers Kit
Everything needed to read andwrite RFID tags and begin developing RFID-enabled applications:
- Test chassis
- Cables
- Antenna
- Sample Tags
- Full schematics to help you design your own complementary components
Mercury API
A common development platform, supporting an extensive variety of hardware to connect, configure, and control ThingMagic readers.
Universal Reader Assistant
A utility for advanced demo, testing, and tuning of all ThingMagic readers. Reduces complexity for novice users while permitting low-level control for advanced developers.
