EN
ThingMagic NANO UHF RFID Reader/Writer Module
ThingMagic Nano delivers the smallest form factor for a Mercury Series embedded UHF RFID module with very low power consumption and is ideal for battery operated, low cost, small form-factor portable readers. ThingMagic Nano’s wide RF output range (0 dBm to +27 dBm) is important for the read/write requirements for RFID-enabled printers and tag commissioning stations. It features a surface mount package designed for the efficiency of SMT manufacturing, driving down the total cost for embedding RFID in volume applications, including handheld devices, consumables authentication, device configuration and access control.
- Overview
- Specifications
- Introduction
- Recommended Products
Overview
ThingMagic Nano is the smallest unit in the M6e series and is a low-power ultra-high frequency RFID identification module. It provides a wider radio frequency output range, which is useful for built-in power-driven RFID battery-operated RF-enabled printers. commissioning stations (product authentication) and RFID access control readers are very important.
The ThingMagic Nano UHF RFID reading and writing module is the smallest UHF RF embedded unit in the M6e series, aiming to provide a low-power, low-cost, and miniaturized portable RF reader solution.
The RF output range (0 dBm to +27 dBm) of ThingMagic Nano is very important for the read and write requirements of RD-based printers and tag debugging stations. Its surface packaging is designed to enhance the efficiency of SMT production while reducing the total cost of batch embedded RFID applications, including consumable certification and equipment configuration.
Specifications
| Physical | |
| Dimensions | 22 mm Lx 26 mm W x 3.0 mm H(0.866 in Lx 1.024 in W x 0.118 in H) |
| Tag/Transponder Protocols | |
| RFID ProtocolSupport | EPCglobal Gen 2 (ISO 18000-6C) |
| RF Interface | |
| Antennas | Single 50 Ω connection (board-edge) |
| RF Power Output | Separate read and write levels, command-adjustable from 0 dBm to +27 dBmin 0.01 dB steps |
| Regulatory |
Pre-configured for the following regions: FCC (NA, SA) 917.4-927.2 MHz`ETSI (EU) 865.6-867.6 MHz TRAI (India) 865-867 MHz`KCC(Korea)917-923.5 MHz MIC (Japan) 916.8-923.4 MHz`ACMA (Australia) 920-926 MHz SRRC-MII (P.R.China) 920.1-924.9 MHz 'Open'(Customizable channel plan; 859-873 MHz and 915-930 MHz) |
| Data/Control Interface | |
| Physical | 41 board-edge connections providingaccess to RF, DC power, communication,and GPIO signals |
| Control/DataInterfaces | `UART; 3.3V logic levels; 9.6 to 921.6 kbps`Shutdown control |
| GPIO Sensorsand Indicators | Four 3.3V bidirectional ports configurableas input (sensor) ports or output (indicator)ports |
| API support | C#/.NET, Java, and Embedded "C" APIs |
| Power | |
| DC Power Required |
• DC Voltage: 3.3 to 5.5 V for +25 dBm out 3.7 to 5.5 V for +27 dBm out • DC power consumption when reading: 3.2 W @ 5 VDC for +27 dBm out 2.9 W @ 5 VDC for +25 dBm out 1.5 W @ 5 VDC for 0 dBm out |
| Idle Power Consumption |
0.84 W in ready mode 0.015 W in sleep mode 0.00025 W in shutdown mode |
| Environment | |
| Certification |
FCC 47 CFR Ch. 1 Part 15 Industrie Canada RSS-21 0 ETSI EN 302 208 v1.4.1 |
| Operating Temp. | -20C to +60C (case temperature) |
| Storage Temp. | -40C to +85C |
| Shock andVibration | Survives 1 meter drop during handling |
| Performance | |
| Boot time | Less than 30 msec after initial calibration boot |
| Performance | Up to 200 tags/sec reading 96-bit EPC |
Specifications subject to change without notice
Introduction
Develop
Create RFID-enabled solutions using industry-standard tools.
Deploy
Enable rapid deployment and reliableoperation of RFID solutions within a wide variety of new and existing environments.
Optimize
Maximize productivity, improve ROl, and lower operating costs.
