EN
ThingMagic M7e-Pico UHF RFID Reader/Writer Module
The ThingMagic M7e-Pico UHF RFID module is the smallest embedded UHF RAIN RFID module in the Mercury series. This module has extremely low power consumption, making it ideal for low-cost small portable readers powered by batteries. ThingMagic M7e-Pico UHF RFID module has a wide RF output range (0dBm - +24dBm), which can meet the read/write requirements of RFID-enabled printers and label debugging stations.
The ThingMagic M7e-Pico UHF RFID module comes in a surface mount package designed to increase the efficiency of surface mount technology manufacturing while reducing the total cost of embedding RFID in volume applications. This package is also ideal for handheld devices, consumable authentication, device configuration and access control.
ThingMagic M7e-Pico UHF RFID module supports ThingMagic Mercury API.
- Overview
- Specifications
- Applications
- ABOUT JADAK
- Recommended Products
Overview
Features & Benefits:
• Small surface mount technology (SMT) is suitable for highly integrated compact designs
• It performs well in hard-to-read environments
• Low power consumption can improve battery usage efficiency
• The Impinj E310 RAIN radio frequency identification reader chip is adopted
• Supports the EPCglobal Gen2V2 (ISO 18000-63) agreement and can meet the industry label standards
• It can be configured for multiple regions, such as FCC/IC (North and South America), ETSI (the European Union), as well as other regions like India, China, South Korea, Australia and Japan, and uses a single SKU for global use
• Supports fully open range (860-930 MHx)
Specifications
| Ordering information | |
| Module | M7E-PICO |
| Modules on the carrier board | M7E-PICO-CB |
| Development toolkit | M7E-PICO-DEVKIT |
| Physical properties | |
| Size | 18mmx21mmx3.0mm |
| Tag/transponder protocol | |
| Radio Frequency Identification protocol support | EPCglobal Gen 2V2 (ISO 18000-63) |
| Radio frequency interface | |
| Antenna connector | Single 50Ω connection (board edge) |
| Radio frequency power output | Separate read and write levels are available, with a command adjustable range of 0dBm to +24dBm, and the minimum fine-tuning step size can be 0.01 dB |
| Regulations |
Pre-configured for the following regions: FCC(North America, South America)902-928 MHz ETSI(EU)865.6-867.6 MHz TRAI (India)865-867 MHz KCC(South Korea)917-923.5 MHz ACMA(Australia)920-926 MHz SRRC-MII(China)920.1-924.9 MHz; MIC(Japan)916.8-922.2 MHz "Open" (customizable channel planning; 860-930 MHz) |
| Data/control interface | |
| Physical properties | 41 board edge connections can be used to access RF, DC power supply, communication, control and GPIO signals |
| Control/data interface | UART; 3.3V logic level, 9.6- 921.6kbps |
| GPIO sensors and indicators | Four 3.3V bidirectional ports, which can be configured as input (sensor) ports or output (indicator) ports |
| API support | C, C#/.net, Java |
| Power supply | |
| Requires a DC power supply |
Dc voltage: 3.3-5.5V(when the output is + 24dBm) Dc power consumption (radio frequency level): <2.5W(when the DC voltage is 5V and the output is +24dBm) <1.5W(when the DC voltage is 5V and the output is 0dBm) |
| Power consumption (when no transmission occurs) | 0.84 W |
| Idle energy-saving option |
Ready: 0.84 WSleep: 0.015 WShutdown: 0.00025W |
| Environment | |
| Certification |
The United States (FCC 47 CFR Chapter 1 Part 15); Canada (Canadian Industrial Standard RS-21 0); European Union (ETSI EN 302 208 |
| Working temperature | v3.1.1, RED 2014/53/EU), MIC Article 38, Section 24 |
| Storage temperature | -40℃ to +60℃(enclosure temperature) |
| Shock and vibration | To 40 ℃ to + 85 ℃ |
| Performance | |
| Maximum reading rate | Up to 300 tags per second |
| Maximum tag reading distance | When using a 6 dBi antenna (30 DBM EIRP), over 3 meters (10 feet) |
| Specifications are subject to change without further notice. The best situation for a well-matched antenna | |
Applications
• Mobile devices such as printers, handheld devices and sensor networks
• Label debugging station
• Battery-powered equipment
• Smartphone accessories
• Medical equipment suitable for the medical and health care and pharmaceutical industries
• Atms and vending machines
ABOUT JADAK
Novanta JADAK is a market leader in providing machine vision, radio frequency identification, barcodes, printing, and color and light measurement products and services for original equipment manufacturers. Its business encompasses the design and manufacture of customized embedded inspection and analysis solutions to assist customers in addressing specific inspection, tracking, scanning and recording challenges. JADAK is headquartered in Syracuse, New York, and has sales and technology centers all over the world. For more information, please visit www.jadaktech.com. ThingMagic belongs to JADAK's radio frequency identification series of products.
Novanta is a trusted technology partner for original equipment manufacturers in medical and advanced industrial technologies, with deep proprietary technology and expertise in photonics, vision and precision motion technology. For more information, please visit www.novanta.com.
