EN
Linux 4 Port UHF RFID Reader
FU-M6-A is an easy to install, small size,unobtrusive, metal sheel, 4-port reader, for Industrial and commercial environments.
Driven by ThingMagics powerful M6e UHF RFID Module, Freescale's Arm-Cortex A7 provides a robust and stable Linux platform.
FU-M6-A ‘s TCP/IP and Wi-Fi options allow for flexible, low cost, single cable installations.
- Overview
- Specifications
- Recommended Products
Overview
Product Introduction
The FU-M6-A UHF RFID reader is an industrial-grade four-channel fixed RFID reader integrated with ThingMagic's excellent M6e-A module as its core. The fixed RFID reader adopts a high-quality sheet metal casing, provides 4 TNC antenna interfaces, supports 4 independent antennas, offers industrial-specific communication and power interfaces, has a compact appearance and is easy to install. The RFID reader has an IP56 protection rating and is suitable for use in various industrial and commercial environments, meeting the requirements of high and low temperature harsh working conditions. RFID readers are widely applicable to various industrial and commercial environments such as medical care, hotel laundry, smart warehousing, and new retail.
Product Features
The FU-M6-A UHF RFID reader fully exploits the algorithmic advantages of the Thingmagic RFID module. Its excellent compatibility with tag chips The ultra-high frequency RFID reader supports Alien H3, Impinj M series, NXP G2x* & G2i* series, and ID Cool Log tag chips, and the tag compatibility is industry-leading.
The FU-M6-A ultra-high frequency RFID reader is a high-performance four-channel RFID reader. FU-M6-A supports multiple UHF RFID protocols such as EPC Gen2, ISO18000-6B, 18000-6C, and IP-X (18000-6D) (ISO18000-6B&6D, authorization is required for use). The RFID reader supports automatic identification of multiple protocols and mode switching.
The FU-M6-A fixed RFID reader is designed in accordance with the EMC IEC61000-4 standard, meeting the industrial-grade wide voltage input mode. Both the power input and signals are isolated, with an isolation voltage of 2KV. With wide voltage input and industrial-grade wide operating temperature, the ultra-high frequency RFID reader ensures an extremely long stable working time. Industrial-grade serial port/network port output, meeting the requirements of high-speed automatic real-time data transmission.
The FU-M6-A fixed RFID reader fully supports the ThingMagic Mercury API embedded operating system and provides. The SDKS of NET and Java can easily customize interfaces, thereby enabling the necessary control over readers.
Features & Benefits:
⚫ Operating system Linux 4.4( 700mHz, 256 MB DDR, 256 MB Flash )
⚫ Built Around Proven ThingMagic Technology
⚫ Based on Mercury API software support
⚫ World-wide frequency coverage
⚫ Reads up to 750 tag /s
⚫ Independent read and write RF controls
⚫ Power signal ESD：
±8kV(contact);
±15kV(air)
⚫ Antenna signal ESD：
±2kV(contact);
±15kV(air)
⚫ Optically Isolated Inputs & Outputs *4
⚫ Operating Temperature: -40°C to +60°C
⚫ Storage Temperature: -40°C to +85°C
⚫ Humidity: 5% to 95% (non-condensing)
⚫ Degree of protection: IP 65
⚫ Programming Interface: Java, C,
Specifications
| RFID Protocol Support | ISO18000-6C(EPC Class1 Gen 2)/ISO18000-6B/IP-X/Gen2v2/AEI ATA(ISO18000-6B/IP-X/AEI ATA, Need to pay license) | ||
| UHF RFID Antenna Interface | |||
| Ext. Interface | RP-TNC*4 connector | ||
| RF Power | Separate read and write levels, command adjustable from +5 dBm to 31.5 dBm*in 1 dB steps, | ||
| Regulatory |
FCC (NA,SA)902-928 MHz/ETSI(EU)865.6-867.6 MHz/TRAI (India)865-867 MHz/ KCC(Korea)917-920.8 MHz/ACMA (Australia) 920-926 MHz/ SRRC-MII (P.R.China) 920-925 MHz/MIC (Japan)916.8-923.4 MHz 'Open'(Customizable channel plan; 865-869, 902-928 MHz) |
||
| Data/Control/Wi | reless Interfaces | ||
| WIFI | 802.11 a/b/g/n (optional) | ||
| RF Connector | TNC M*4/SMA M*1(optional) | ||
| Connector | RJ45*1 (10/100 Base-T Ethernet)/GPIO*4/RS232*1/Power*1 | ||
| Reset | Power Off | ||
| Physical | |||
| Dimensions | 195*141*36mm | Weight | 0.75 KG |
| Power | |||
| DC Power | 12VDC, Max DC power: 20W | ||
| Environment | |||
| Temperature | Operating: -20℃to+60'℃; Storage: -40Cto+85℃ | ||
| Humidity | 5% to 95% (non-condensing) | ||
| RFID performance | |||
| Max Tag Cache | >10M bits | ||
| Max Tag Read | >750 tag/s | ||
| Max EPC ID | 512 bits | ||
| Architecture | |||
| Processor | Arm-Cortex A7/Freescale i.Max (700mHz, 256 MB DDR, 256 MB Flash ) | ||
| Operating System | Linux 4.4 | ||
| Networking | TCP/IP or WIFI | ||
| Security | SSL/SSH-based security | ||
| Network IP | TCP/IP Static / WIFI Dynamic | ||
| Programming In | terface | ||
| Host API | Java, C | ||
| Certification and | Safety | ||
| Certification | Thingmagic M6e Module:Canada (Industry Canada RSS-21 0): EU (ETSI EN 302 208 v3.1.1, FCC47 CFR CH.1Part15, RED 2014/53/EU) | ||
| Other | ROHS | ||
| Ordering Information | |||
| TCP/IP | FU-M6-A 4(4Port)/ FU-M6 -A 2(2Port)/ FU-M6-A1(1Port) | ||
| WIFI | FU-M6-A4-W (4Port)/FU-M6-A2-W(2Port)/FU-M6-A1-W(1Port) | ||
