ShenZhen Fuwit Technology Co., Ltd
uhf swing reader-0

UHF RFID handheld reader

Home >  Products >  UHF RFID handheld reader

UHF Swing reader

R2 is an ultra-high frequency product. It is a convenient, fashionable and efficient handheld data acquisition device newly launched by our company. The product adopts the high-performance Cortex-M3 core processor. The body is thin and light, and the operation is simple. The high-performance ultra-high frequency inventory taking function helps with inventory taking in the retail industry of shoes, clothing, etc. The device transmits the inventory data to the data center via Bluetooth, completing tasks such as inventory taking, asset management, and inspection.

  • Overview
  • Specifications
  • Recommended Products
Overview

Battery precautions

Do not leave the battery idle for too long, whether in the product equipment or in the warehouse. If the battery has been in use for six months, check the charging status or properly handle the battery.

The service life of lithium-ion batteries is generally two to three years, and they can be charged 300 to 500 times in a cycle. A complete charging cycle refers to a full charge, complete discharge, and then a full charge again.

The lifespan of rechargeable lithium-ion batteries is limited and they will gradually lose their ability to retain charge. This amount of loss (aging) is unchangeable. When the battery loses its capacity, its service life will be reduced (operating time).

When lithium-ion batteries are not in use or idle, they continue to discharge slowly (automatically). It is necessary to frequently check the charging status of the battery. You can also refer to the instructions on how to charge the battery in the user manual.

Observe and record a battery that is not in use but fully charged. Based on the operating time of the new battery, compare it with the battery that has been in operation for a longer time. The battery's operating time will vary depending on the product configuration and application.

Regularly check the battery charging status

When the battery running time drops to approximately 80% lower than the original running time, the battery charging time increases significantly.

If the battery has been idle or unused for a long time, it is necessary to check whether it still has power. If the battery has no remaining power, do not attempt to charge it or use it. A new battery should be replaced. Remove the battery and place it separately.

The battery should be stored at a temperature between 5°C and 20°C (41°F to 68°F).

Note: Replacing batteries of the wrong model poses an explosion risk. Be sure to dispose of used batteries in accordance with the instructions.

图片2.png

Specifications
Physical parameters
Size 282x117.5x32mm
Weight 334g (Including battery)
Battery 5200mAh 4.35V
Appearance material Plastic
Construction materials Plastic
Buzzer Support
Display 1.77 寸, 128X160
Performance parameters
MPU Cortex-M3/72 MHz
RAM+ROM 64M+4G
Usage environment
Operating temperature -20℃ - 50℃
Storage temperature -40℃ - 70℃
Humidity 5%RH-95%RH (No condensation)
Data communication
WPAN Supports Bluetooth 4.0 and Bluetooth BLE
Data collection
Barcode scanning engine SE2707
UHF
Antenna Circularly polarized antenna (4dBi
Frequency 920-925MHz/902-928MHz/865-868MHz
Agreement EPC C1 GEN2 / ISO18000-6C
Power 1W (30dBm, adjustable from +5 to +30dBm)
Read-write distance >28 meters (indoor); > 12 meters (outdoor open environment)

Get a Free Quote

Our representative will contact you soon.
Email
Name
WhatsApp
Company Name
Message
0/1000

Copyright © ShenZhen Fuwit Technology Co., Ltd All Rights Reserved - Privacy Policy - Blog