EN
ThingMagic M7E-DEKA UHF RFID Reader/Writer Module
ThingMagic M7E-DEKA is the smallest form factor for a Mercury Series embedded UHF RAIN RFID module with extended RF power. With low power consumption, it is ideal for battery- operated, small form-factor portable use cases.ThingMagic M7E-DEKA’s wide RF output range (0 dBm to +27dBm) is important for the read/write requirements for RFID enabled Mobile tablets, printers and tag commissioning stations. ThingMagic M7E-DEKA features a surface mount package designed for the efficiency of SMT manufacturing, driving down the total cost for embedding RFID in volume applications. It is ideal for handheld devices, printers, consumables authentication, device configuration and access control.ThingMagic M7E-DEKA is supported by ThingMagic Mercury API.
- Overview
- Specifications
- Applications
- ABOUT JADAK
- Recommended Products
Overview
The Industry’s Smallest Embedded UHF RAIN® RFID Module
ThingMagic M7E-DEKA is the smallest form factor for a Mercury Series embedded UHF RAIN RFID module with extended RF power. With low power consumption, it is ideal for battery-operated, small form-factor portable use cases. ThingMagic M7E-DEKA’s wide RF output range (0 dBm to +27dBm) is important for the read/write requirements for RFID enabled Mobile tablets,printers and tag commissioning stations.
ThingMagic Petite is available in a surface mount package designed to increase the efficiency of surface mount technology manufacturing while reducing the overall cost of embedding RFID in volume applications. This package is also ideal for handheld devices, printers, consumable authentication, device configuration and access control.
ThingMagic M7E-DEKA is supported by ThingMagic Mercury API.
Features & Benefits:
• Small Surface Mount Technology (SMT) Form Factor for Highly Integrated, Compact Designs
• Low Power Consumption for Efficient Battery-Use
• Features the Impinj E310 RAIN RFID Reader Chip
• Support for EPCglobal Gen2V2 (ISO 18000-63) Protocol Meets Industry Tag Standards
• Reads up to 300* tags / second
• Configured for Multiple Regions, such as FCC / ISED (North & South America), ETSI (European Union), and Other Regions Including India, China, Korea, Australia and Japan
• Single SKU for Global Use
• Support for full Open region (860 to 930MHZ)
Specifications
| Ordering Information | |
| Module | M7E-DEKA |
| Module on Carrier Board | M7E-DEKA-CB |
| Development Kit | M7E-DEKA-DEVKIT |
| Physical | |
| Dimensions | 18 mm L x 21 mm W x 3.0 mm H (0.71 in x 0.83 in x 0.12 in H) |
| Tag /Transponder Protocols | |
| RFID Protocol Support | EPCglobal Gen 2V2 (ISO 18000-63) |
| RF Interface | |
| RF Transceiver | Impinj E310 |
| Antenna Connector | Single 50 Ω connection (board-edge) |
| RF Power Output | Separate read and write levels, command-adjustable from 0 dBm to +27dBm in 0.5 dB steps, accurate to+/-1 dBm |
| Regulatory |
Pre-configured for the following regions: FCC (NA, SA) 902-928MHz; ETSI (EU) 865.6-867.6 MHz; TRAI (India) 865-867 MHz; KCC (Korea) 917-923.5 MHz; ACMA (Australia) 920-926 MHz; SRRC-MII (P.R. China) 920.1-924.9 MHz; MIC (Japan)916.8-922.2 MHz; 'Open' (Customizable channel plan; 860-930 MHz) |
| Data/Control Interface | |
| Physical | 41 board-edge connections providing access to RF, DC power, communication, control and GPIOsignals |
| Control/Data Interfaces | UART; 3.3V logic levels 9.6 to 921.6 kbps |
| GPIO Sensors and Indicators | Four 3.3V bidirectional ports configurable as input (sensor) ports or output (indicator) ports |
| API support | C, C#/.NET, Java |
| Power | |
| DC Power Required (Typical) |
DC Voltage: 3.3 to 5.5 V for +25 dBm out; 3.7 to 5.5 V for +27 dBm out DC power consumption @ RF level: 3.1 W @ 5 VDC for +27 dBm out*; <1.2 W @ 5 VDC for 0 dBm out |
| Idle Power Saving Options |
Ready: 0.665 WSleep: 0.080 WShutdown: 0.065 W |
| Environment | |
| Certification |
USA (FCC 47 CFR Ch. 1 Part 15); Canada (Industry Canada RSS-247); EU (ETSI EN 302 208 v3.3.1, RED 2014/53/EU), JAPAN (MIC Article 38 Section 24) |
| Operating Temperature | -40℃ to +60℃(case temperature) |
| Storage Temperature | -40℃ to +85℃ |
| Shock and Vibration | Survives 1 meter drop during handling |
| Performance | |
| Max Read Rate | Up to 300*tags/second |
| Tag Read Distance (Typical) | Over 4.5 meters (15 feet) with 6 dBi antenna (33 dBm EIRP)* |
|
Specifications subject to change without notice. *Best case with good antenna matching |
|
Applications
• Mobile Devices, including Printers, Handhelds, and Sensor Networks
• Battery-operated devices
• Smartphone Accessories
• Medical Equipment for Healthcare and Pharmaceutical Industries
• Kiosks and Vending Machines
• Tag Commissioning Stations
ABOUT JADAK
JADAK, a business unit of Novanta, is a market leader in machine vision, RFID, barcode, printing, and color and light measurement products and services for original equipment manufacturers. The business designs and manufactures custom embedded detection and analysis solutions that help customers solve unique inspection, tracking, scanning and documenting challenges. JADAK is based in Syracuse, New York, with sales and technical locations across the globe. For more information, visit www.jadaktech.com. ThingMagic is JADAK’s RFID line of products.
Novanta is a trusted technology partner to OEMs in the medical and advanced industrial technology markets, with deep proprietary expertise in photonics, vision and precision motion technologies. For more information, visit www.novanta.com.
